Ikea blimp lamp
GardeningIndoors
2018.11.12 07:50 NalJohn GardeningIndoors
GardeningIndoors is a place to post all indoor garden variety plants. This subreddit is for gardeners who want to scratch their plant itch all year. We are here to help, and promote ingenuity. Doesnt matter if its in a grow tent or a desk lamp on your kitchen table - We love our Indoor gardens and we hope you do too!
2024.05.29 02:15 mynameishwil [Update & Fix] IKEA TRÅDFRI Bulbs sometimes don't turn fully off and stay at 1%
Hi all,
As an
update to this post I have found the issue that caused this problem.
While a lot of people were suggesting it was wiring, it was nothing to do with that. I received a replacement globe from IKEA and had the exact same issue in different sockets around the home. After some troubleshooting, I determined that the globe will set itself to 1% brightness
if you turn it off twice. So the first time you turn it off, it would be fully off. If you turn send another turn off command, it will then set itself to 1%. Turn it off a 3rd time, it will be fully off. You see the pattern.
This happens in the following situations:
- You use Apple HomeKit/HomeBridge, whereby if you use a scene and activate it twice, it will send a turn-off event twice. This triggers the 1% glow in your bedroom.
- Same in Home Assistant if you use Home Assistance Scenes/Scripts/Automations.
- If you had the light turned off, and have the 'previous state' setting turned on, and turn the light on/off at the wall switch then it will also set itself to 1% brightness.
As I have multiple overlapping scenes - for example I turn a light off before bed and then an automatic 1am goodnight scene kicks in, I would always wake up to the light being at 1%. I also had multiple Home Assistant automations turning off a lamp, and they would overlap triggering this behaviour.
I have fixed this bug by moving all my scenes to Home Assistant scripts. I then introduced an IF condition check to see if the light is turned on, and if so only
then turn the globe off. If it is already off, no action is taken.
Since doing this I have not experienced this bug once. The only downside is I can no longer ask Siri to turn off all the lights downstairs, as this will turn off lights that are already turned off and again cause the problem.
This is still just a workaround and I'm not sure what the proper fix is. I've seen mentions that perhaps it's to do with Home Assistant/Zigbee2MQTT sending both an ‘off’ attribute/state that are doubling up. But nonetheless I hope this helps someone get around this annoying bug in IKEA lights.
submitted by
mynameishwil to
homeassistant [link] [comments]
2024.05.28 19:31 92mac Can I change a 5a light plug to a regular UK wall plug?
As title really... I've been given an IKEA Lauters floor lamp, but it has a 5 amp light plug attached and I only have regular sockets in my house. Can I just swap the wires into a regular UK plug? It only has two wires (one going into neutral, and one going in to live), but no fuse. Thanks
submitted by
92mac to
DIYUK [link] [comments]
2024.05.28 07:53 Igne0usr0gue My agere wishlist! (Mostly toys lmao)
- My little pony toys (I want atleast the whole mane 6)
- mlp g1 tshirts (they're so vintage and cute)
- those cute cat print tshirts
- Littlest pet shop toys!
- Legos!
- colorful wooden blocks
- small farm animal figures
- squishes!
- a toy train, the automated battery ones with buildable tracks
- the jellycat dragon plush, big size and white
- ikea alien plush
- a life sized baby doll
- seal plushies!
- rattle toys
- maybe teethers
- maybe puzzles
- milk bottle 🍼
- those fish tank futiger aero lamp
- very very soft blanket!
- LOTS and LOTS of little snacks bags or boxes
submitted by
Igne0usr0gue to
ageregression [link] [comments]
2024.05.28 00:25 shailan_gsa is it possible to replace the bulbs on the Ikea Harte - LED Work lamp ?
submitted by
shailan_gsa to
IKEA [link] [comments]
2024.05.27 17:34 ChardToACrisp New to Hue
submitted by
ChardToACrisp to
Hue [link] [comments]
2024.05.27 08:58 FriklyForHome Smart and Stylish: Budget-Friendly Decorating Tips for Single Men
| Decorating a new place as a single male on a budget can be both fun and rewarding. Here's a comprehensive guide to help you create a stylish and comfortable space without breaking the bank. Living Room Decor 1. Plan and Prioritize Determine Your Style: Decide on a general style or theme you like, such as modern, industrial, minimalist, or rustic. This will guide your decorating choices and ensure a cohesive look. Make a List: Identify the key pieces you need first, such as a bed, sofa, and dining table. Focus on essential items before adding decorative pieces. This helps you manage your budget effectively and ensures you get the most important items first. 2. Budget-Friendly Furniture Secondhand Stores: Check thrift stores, consignment shops, and online marketplaces like Craigslist, Facebook Marketplace, and OfferUp for deals on furniture. You can find unique and affordable pieces that add character to your space. Flat-Pack Furniture: Stores like IKEA offer stylish and affordable options that are easy to assemble. These pieces are perfect for creating a modern and functional home on a budget. DIY Projects: Consider making your own furniture or repurposing items. Pallet furniture can be an inexpensive and trendy option. There are plenty of tutorials online to guide you through the process. 3. Multi-Functional Pieces Storage Solutions: Look for furniture that doubles as storage, such as ottomans, beds with drawers, and coffee tables with storage space. These pieces help keep your space organized and clutter-free. Convertible Furniture: Invest in items like sofa beds or foldable tables to maximize space and functionality. These are especially useful in smaller apartments where every square foot counts. 4. Smart Decor Choices Paint: A fresh coat of paint can dramatically change a room's look. Choose neutral colors for a timeless look, and use bold colors for accents. Paint is a cost-effective way to refresh your space. Wall Art: Create a gallery wall with inexpensive prints, posters, or DIY art. Frames from discount stores can give a polished look. This allows you to personalize your space without spending a lot of money. Lighting: Good lighting can enhance any space. Look for stylish yet affordable lamps and light fixtures. String lights can also add a cozy ambiance. Proper lighting can make your home feel more inviting and comfortable. 5. Textiles and Accessories Rugs: Rugs can define spaces and add warmth. Look for sales or check secondhand options. They are a great way to add color and texture to your floors. Pillows and Throws: These can add color and texture to your living space. They are also an easy way to change up your decor. Mix and match different patterns and colors for a unique look. Curtains: Affordable curtains can add a touch of sophistication. Make sure they match your overall color scheme. Curtains also provide privacy and can help with insulation. 6. Personal Touches Photos and Memorabilia: Display personal photos and items that have sentimental value. This makes your space feel more like home and reflects your personality. Plants: Houseplants can liven up your space and improve air quality. Low-maintenance options like succulents or snake plants are ideal. Plants add a natural element and can make your home feel more vibrant. 7. Keep It Organized Declutter Regularly: Keeping your space tidy will make it feel larger and more welcoming. A clutter-free environment is essential for maintaining a comfortable home. Use Storage Solutions: Utilize shelves, baskets, and bins to keep everything organized and accessible. Proper storage helps keep your space functional and neat. Sample Room Setup Living Room: - Sofa: A secondhand or IKEA sofa.
- Coffee Table: A DIY pallet coffee table or an affordable option from a discount store.
- Rug: A stylish but budget-friendly rug.
- Wall Art: Prints or posters in inexpensive frames.
- Lighting: A floor lamp and string lights for ambiance.
Bedroom: - Bed Frame: A simple, sturdy frame, potentially secondhand.
- Bedding: Comfortable, high-quality bedding.
- Nightstand: A repurposed side table or a budget-friendly option.
- Closet Organization: Shelves, bins, and hangers to maximize space.
Dining Area: - Table: A compact dining table, possibly foldable.
- Chairs: Mismatched chairs can add character and are often cheaper secondhand.
- Lighting: A pendant light or simple fixture to create a focal point.
By carefully selecting and prioritizing your purchases, you can create a stylish and comfortable home that reflects your personality without spending a fortune. Happy decorating! submitted by FriklyForHome to u/FriklyForHome [link] [comments] |
2024.05.27 08:16 TooplexWex Forsaaaaaaaa Pepega
2024.05.26 21:38 T1Il Gestaltungsideen für diese Badezimmerlampe
2024.05.26 18:47 Danny_Gartside Sonos Beam clicking sound
Hi all,
I have a set up with a Sonos Beam and a pair of ikea lamp/ surround speakers.
Recently we’ve noticed a clicking through the beam which watching tv.
Has anyone experienced the same and has anyone come across a fix?
Any help much appreciated
submitted by
Danny_Gartside to
sonos [link] [comments]
2024.05.25 22:07 malufa Is there any way to install a lampshade on HÅRSLINGA?
submitted by
malufa to
ikeahacks [link] [comments]
2024.05.25 16:21 GeekyGuyBrooklyn Where to buy quality table lamps for nightstands that isn’t IKEA?
I see ikea recommended a lot for table lamps but I have enough furniture from them and I don’t want my home to feel like an IKEA store. My budget is flexible at $200. I like simple designs. Nothing fancy. Any advice or suggestions would be greatly appreciated. Thank you redditors!
submitted by
GeekyGuyBrooklyn to
InteriorDesign [link] [comments]
2024.05.25 10:42 randiusi Help me fix this lamp
2024.05.25 09:53 alehel How to troubleshoot issues
My parents currently have the following. 2 IKEA symfonisk lamps, a playbar, a sub and 2 Sonos ones as rears. After speaking with my dad a while back I thought they never used the app, only using airplay. Turns out my mom has been using the app and now has a lot of issues after the update.
First of all, not a hate thread, so if all you have to say is "f Sonos", etc, then honestly just don't bother. It's getting old, we all know there are issues, and you're not contributing. I'm happy for the discussion to blame the new app if we can do it like adults.
Now on to my question.
Airplay on their setup works fine. Also, according to my mum, the old app worked fine. With the new app however, there are issues.
When we tried playing an album from "My Music" on Apple Music. The app loaded it and then the playing track name iterated quickly through the name of every track before stopping on the last track name, without having played any of them. Almost seemed like it was being served files it didn't know how to play. We tried this a couple of times, and when we selected a song mid-album we finally got a spinner on the play button and the track did actually play. We were, however, unable to pause it reliably. We pressed pause, the app made it look like the music had stopped, but the music was still playing on the playbar. So now we had an app that thought it was paused, but it wasn't. The exact same behaviour when I tried playing Sonos radio. Starting there radio stream did work reasonably well however, but it took a good 10 sec to load.
Changing volume was almost impossible. If we used volume up/down on her phone, there would be a delay of roughly 7 seconds before anything happened. My phone was even worse as it seemed like the playbar never responded to volume change and after a while the volume slide jumped back to where it was (I'm on android, she's on iOS). Using the slider was weird. Nothing much happened while we held it down, but once we released it, the slider jumped back and forth several time within the range we traveled. Volume slider kept jumping for maybe 4 seconds, and the playbar volume went up and down as well, although somewhat delayed.
I had my mum try the web app, and she says she had a similar experience. Not sure how bad it was though as I didn't think to try it myself while I was there.
So. Any ideas? I'm thinking this shouldn't be network related if AirPlay works fine and the old app apparently worked fine before the update? We have power cycled the router. Anyone had similar and been able to fix?
I also have the new app, and although volume was very unresponsive for me at the beginning, it has been working fine for the last 3 or 4 days.
submitted by
alehel to
sonos [link] [comments]
2024.05.24 13:33 Spearajew Did I make a mistake? Joining the ecosystem today and I see these app woes.
Hi everyone.
I just bought a Beam 2 and a Ray for my living room and office respectively, with the intentions of looking at the IKEA Symfonisks lamp and bookshelf speakers later down the line. I’m brand new to Sonos, but my friend sold me on it when I was at his place and he was showing me everything about it. Since then, I’ve been planning and prioritizing what I need for my place, without regard of the app, I just assumed it was good because he never had any issues with it. Now I’m seeing that there are some app redesigns and people saying it’s the slow downfall of the company (something about the CEO?)
I’m just looking for some feedback and to see if I need to consider other options or if this is just blown out of proportion at the moment. I haven’t had a chance to set up anything but I will be picking up my speakers from Best Buy after work today so I’m looking forward to it.
UPDATE: so I got both the speakers up and running no problem. I had an issue with the TruePlay on the Beam but after a while I finally got it working and tuned. So far I’m loving it and the app works but I could only imagine what it was like before, it does seem pretty clunky.
Also, when I set up the Ray, it said that it could not detect my optical cable, but it’s working? Ican adjust my volumes with my Apple TV and the tv is set to optical output. So not sure what that’s about.
submitted by
Spearajew to
sonos [link] [comments]
2024.05.24 10:05 Poseid0n_ Scammer?
2024.05.23 21:16 sveferr1s Symfonisk as surround
Bought an Arc sound bar for my living room. Sounds great but I'd like some true surround sound. I don't fancy having a pair of era one speakers on stands so am thinking of getting a pair of IKEA symfonisk lamps stands instead. I'm no audiophile so I doubt whether I would honestly be able to hear much of a difference between these and the true Sonos speakers. I prefer the aesthetics of having a pair of lamps rather than a pair of speakers so my question is there a massive difference between the two speakers?
submitted by
sveferr1s to
sonos [link] [comments]
2024.05.23 16:05 colorblindncantdsgn Please help me pick a rug!
| New apartment with great natural lighting. Looking for suggestions on a rug to tie the place together. The only furniture I have is a “gray turquoise” Ikea Kivik couch and a “mocha” wooden tv stand (2nd photo, but not delivered yet). The couch is already a bit bold of a color, so I’m worried some of the example rugs on the Ikea website might be too bold of a pattern in combination. I prefer more of a mid century modern style, but with the concrete ceilings I’m open to a more rustic style as well. No pets or kids so not worried about keeping it clean. Open to any suggestions and feedback. The room is quite small so I’ve decided to push the couch into the corner, but I will probably pull it away to make room for a floor lamp. Thank you! submitted by colorblindncantdsgn to interiordecorating [link] [comments] |
2024.05.23 16:02 RideDiligent4524 Making LED lamps safely
I've made a couple of lamps recently, using steel pipe, pipe fittings, found objects, Mason jars, etc. They were a lot of fun, and I've gotten some interest on them, so I'm thinking about making a few for sale. Whether I can do that safely, and legally, is the main question at the moment. Currently figuring out the "legal" part, but as far as making it safe goes:
What I've done so far is wire them with mains power, from the wall receptacle, to a rotary switch, to the lamp socket. All the connections are insulated spade connectors, securely crimped. I've added a grounding wire from the input cord to the frame, in case of a short. The bulbs are LED, and when a bulb is enclosed for any reason, I've added vents to the enclosure. The switches, cords, and lamp sockets are UL-listed components. The wire is 16-gauge stranded, for the most part.
The parts and methods I'm suing are, I would guess, better than your average Ikea lamp has. That said, I'm not about to sell somebody an electrical short or a house fire. Anything else I should do or can do within reason?
Also, if I made a wall sconce - is that something a licensed electrician would install, or not?
submitted by
RideDiligent4524 to
AskElectricians [link] [comments]
2024.05.23 15:38 RideDiligent4524 I'm making a few lamps using LED bulbs - are they safe enough?
I've made a couple of lamps recently, using steel pipe, pipe fittings, found objects, Mason jars, etc. They were a lot of fun, and I've gotten some interest on them, so I'm thinking about making a few for sale. Whether I can do that safely, and legally, is the main question at the moment. Currently figuring out the "legal" part, but as far as making it safe goes:
What I've done so far is wire them with mains power, from the wall receptacle, to a rotary switch, to the lamp socket. All the connections are insulated spade connectors, securely crimped. I've added a grounding wire from the input cord to the frame, in case of a short. The bulbs are LED, and when a bulb is enclosed for any reason, I've added vents to the enclosure. The switches, cords, and lamp sockets are UL-listed components. The wire is 16-gauge stranded, for the most part.
The parts and methods I'm suing are, I would guess, better than your average Ikea lamp has. That said, I'm not about to sell somebody an electrical short or a house fire. Anything else I should do or can do within reason?
submitted by
RideDiligent4524 to
led [link] [comments]
2024.05.23 14:44 RideDiligent4524 Can I make and sell lamps without certification legally? (US, Minnesota)
I've made a couple of lamps, utilizing steel pipe, fittings, various found objects, glass jars, etc. I'm pretty sure I could do a few as a side gig, and make decent money on them. Not, however, enough money to have these pieces UL-tested, or some such, especially since they're one-off pieces, and more art than furniture.
What I don't know is what liability I'm incurring by selling a homemade electrical device. I'm a pretty good hack electrician, and am very confident in the safety factor of what I make - the lights are securely wired, and grounded to the frame in case of a short, and consist of better components than your average Ikea lamp - but all the same, this is an incredibly litigious country and I want to cover my bases.
My questions are:
- If my lamp burns down a house, would it matter whether it was UL listed or not? Would I get sued regardless?
- Would having the buyer sign a waiver, put together by a lawyer, actually offer protection in an event like that?
- Are the standards different between lamps, and light fixtures such as wall sconces or ceiling fans? (This is less of a legal question and more of an electrical code one, but I'm throwing it in anyway.)
- Is using UL-listed components and connectors an adequate substitute?
Thank you!
Edit: I found this statute, which seems relevant, but I'm having a hard time understanding it, if anyone here is better at translating this kind of thing.
3801.3620 - MN Rules Part submitted by
RideDiligent4524 to
legaladvice [link] [comments]
2024.05.23 02:46 surtur97 Convert hardwired light to plugin
Hi all! First time apartment renter here with a quick question. There's no hardwired ceiling light in my new apartment, and I saw a couple of youtube videos showing how to attach then end of a power cord to a hardwired light fixture that can then be used as a plugin. More specifically, I was looking at this ceiling light from ikea:
LIGHT and this power cord from amazon:
CORD1 would these two be compatible in terms of watts? I know that the light has a max of 28 W and the cord has 1600+. I'm assuming that the cord is able to draw a smaller amount of power if the light is that much less?
or would it make more sense to go with another cord like the following:
CORD2 sorry in advance if this sounds too eli5! Brand new to all this and just trying to figure things out!
submitted by
surtur97 to
Electricity [link] [comments]
2024.05.22 21:27 _manual IKEA STRALA 70cm Lamp Shade Lace Instructions
http://activeproperty.pl/